Point d'accès WiFi6 encastré 1800M

Le WAP2100-W618 est un point d'accès sans fil WiFi6 encastré de haute performance développé par BDCOM, conçu pour les espaces intérieurs exigeants tels que les dortoirs d'école, les chambres d'hôtel, les unités de soins hospitaliers et les appartements.

Caractéristiques principales

Solutions sans fil haute performance

Détails de conception conviviaux

Fonctionnalités de sécurité complètes

Application typique

Paramètre Technique

Mounting method In-wall
Dimensions (HxWxD) 86×86×45mm
Ethernet port 1 GE WAN port (POE supported)
3 GE LAN ports
1 RJ11 port
PoE power supply POE input
Antenna type Built-in omnidirectional
Antenna gain 2.4G: 2.5dBi
5G: 2.5dBi
Operating frequency bands 2.4GHz and 5GHz
Wi-Fi data rate 2.4G: 2*2 11ax 573Mbps
5G: 2*2 11ax 1200Mbps
Maximum transmit power 2.4 GHz: 18 dBm (combined power)
5 GHz: 18 dBm (combined power)
The actual transmit power depends on
local laws and regulations.
Modulation OFDM : BPSK@6/9Mbps,
QPSK@12/18Mbps, 16-QAM@24Mbps,
64-QAM@48/54Mbps
DSSS: DBPSK@1Mbps, DQPSK@2Mbps,
CCK@5.5/11Mbps
MIMO-OFDM (11n): MCS 0-15
MIMO-OFDM (11ac): MCS 0-9
MIMO-OFDM (11ax): MCS 0-11
Modulation mode 11b:
DSS: CCK@5.5/11Mbps,
DQPSK@2Mbps, DBPSK@1Mbps
11a/g: OFDM: 64QAM@48/54Mbps,
16QAM@24Mbps, QPSK@12/18Mbps,
BPSK@6/9Mbps
11n: MIMO-OFDM: BPSK, QPSK, 16QAM,
64QAM
11ac/ac wave2: MIMO-OFDM: BPSK, QPSK,
16QAM, 64QAM, 256QAM
11ax: MIMO-OFDM: BPSK, QPSK, 16QAM,
64QAM, 256QAM, 1024QAM
Power adjustment Automatic
Reset Supported
Status LED Solid on / Blinking/ Network error
(The LED can be turned off using software.)
Operating temperature/ Storage temperature 0ºC~50ºC
Operating humidity 10%~95% (non-condensation)
Protection degree IP41
Power consumption < 10W
MTBF > 250000H
11ax supported
Working frequency bands 2.4GHz+5GHz
A-MPDU Supported
A-MSDU Supported
MU-MIMO Supported
OFDMA Supported
Transmit Beamforming (TxBF) Supported
Maximum Likelihood Demodulation (MLD) Supported
Maximum Ratio Combining (MRC) Supported
Space-Time Block Coding (STBC) Supported
Low Density Parity Check (LDPC) Supported
11ac supported
Working frequency bands 5GHz
A-MPDU Supported
A-MSDU Supported
Transmit Beamforming (TxBF) Supported
Maximum Likelihood Demodulation (MLD) Supported
Maximum Ratio Combining (MRC) Supported
Space-Time Block Coding (STBC) Supported
Low Density Parity Check (LDPC) Supported
11n supported
Working frequency bands 2.4GHz+5GHz
A-MPDU Supported
Transmit Beamforming (TxBF) Supported
Maximum Likelihood Demodulation (MLD) Supported
Maximum Ratio Combining (MRC) Supported
Space-Time Block Coding (STBC) Supported
Low Density Parity Check (LDPC) Supported
WLAN basics
Maximum users per radio 128
WPAPSK/WPA2PSK/WPA3 Supported
RTS/CTS Supported
Guest network Supported
Smart device unique SSID Supported
Automatic link fault detection and recovery Supported
Advanced networking features
Automatic network-wide channel adjustment 4
Automatic network-wide bandwidth adjustment Supported
802.11i Supported
Encryption AES, WPA3
Automatic network-wide power adjustment Supported
Security policy
Authentication MAC Address/PSK
User isolation 1.L ayer-2 user isolation
2.SSID-based user isolation
Forwarding security Packet filtering, MAC
address filtering, broadcast
storm suppression
SSID-VLAN binding Supported
802.11w Supported
Layer-2 and layer-3 features
IP address configuration Static IP address, DHCP, and PPPoE
Local forwarding Local forwarding based on SSID+VLAN
Multicast IGMP Snooping
Advanced Wi-Fi features
802.11e WMM
Priority Ethernet port 802.1P identification and marking
Mapping from wireless priorities to wired priorities
Ai QoS Mapping based on application traffic and air
interface queue
Advanced Wi-Fi features
Automatic channel/bandwidth/power selection Supported
Load balancinga Based on traffic / number of users / bands / air interface load
802.11k/802.11v/802.11r Supported
AP Steering Supported
Band Steering Supported
Automatic power control / Packet-by-packet power control Supported
Multicast enhancement Multicast-to-unicast (IPv4)
Installation, management and maintenance
Wizard-guided installation with app Supported
Network pre-deployment Supported
Local management with app/Remote management Supported
Cloud AC management Supported
Remote maintenance Supported

Caractéristiques

Working mode

Supports AP Mode

Routing mode

Bridging Mode

IP functions

Supports IPv4, DHCP, NTP protocols

Supports static IP allocation, dynamic DHCP and PPPoE dial-up

Wireless management

Supports CAPWAP management protocol

Supports Option43, DNS to discover AC

Supports Layer 2 and Layer 3 networking of AC and AP

Supports cross-NAT networking of AC and AP

Supports Layer 2 and Layer 3 user roaming

Supports clock, version and configuration synchronization of AC and AP

Application added

Supports for RTLS probes

Supports docking wireless positioning system

Wireless access

Supports 802.11 protocol suite

Supports multiple SSID management, Chinese SSID and SSID hiding

Supports no SSID, VLAN binding function

Supports SSID-based user limit and isolation

Supports each SSID to specify the parameter template separately

Supports country code setting

User authentication

Supports local authentication and Cloud authentication

Supports multiple authentication methods such as local account, SMS, WeChat, and Vouther

Supports user black and white lists

Supports account-based access period control and bandwidth control

Supports country code setting

Supports country code setting

Security

Supports PSK authentication method

Supports WEP, WPA, WPA2, WPA3 wireless encryption

Supports IP-based, MAC-based filtration

Supports DDoS, De-Auth anti-attack

Supports Rogue AP detection

QoS

Supports 802.11e/WMM

Supports global traffic rate limit

Supports AP-based, VLAN-based, User-based traffic rate limit 

Supports frequency-based, AP-based flow load balancing

Wireless optimization

Supports one-click network optimization, customs wireless RF parameters

Default 8 wireless scene templates, supports user-defined templates

Supports automatic background optimization

Supports 5G prior access, supports restrict access of low-rate users

Management and maintenance

Supports traditional device management such as Telnet, SSH, Web, SNMP and TR069

Supports ping, tracert, debug and other diagnostic tools

Supports CAPWAP-based AC centralized management

Supports COP unified management

Support AP indicator on and off

Informations de Commande

WAP2100-W
WAP2100-W618 WAP2100-W618 in-wall intelligent WiFi6 AP, 1 GE-WAN PoE port, 4 GE-LAN ports, built-in MIMO antenna, WiFi6 , 1775Mbps, PoE power supply (POE devices need to purchase.)

Suivez-nous

Facebook 领英

© 2023 BDCOM. Connecting a Better World